Home   About Us   Location  FAQ  Policies  Contact Us Support   Search  
 

Dell© Equallogic PS6610 chassis
quick reference specifications
Dell Equallogic iSCSI storage arrays provide a robust expansion capability coupled with ease of setup. SCSISTUFF is here help you make the right choice.

PS6610

  • One size chassis with the following configurations
     5U 3.5" - 84 x 2.5" or 3.5" SAS drives
        PS6610ES
           14x 400Gb, 800 Gb SAS SSD drives
           70x 2 Tb, 4 tb 7200 rpm SAS drives
            RAID 6 accelerated is the only option
        PS6610E   - forty two or eighty four 2, 4, 6 TB NL SAS 7200 rpm
            RAID level 6, 10
        PS6610X  - forty two or eighty four 10K drives ( 600G, 900G, 1.2T)
            RAID level 6, 10
  • Supported drives: All drives require unique Equallogic firmware.
  • Version 7 firmware and higher support RAID levels 6, 10
    Firmware upgrade path thru version 9 series is assured
  • 16 max members in one group
    Max of 384 drives and 1.5 PB in a group
  • Dimensions:  
    5U chassis - 8.8 x 19  x 36  inches, weight: 290 pounds with 84 drives installed

  • Standardized chassis
    5U PS6610 series - 2 x type 18 controllers
       2 x 2800 watt power supplies. 240 Volts AC, 50-60 hertz
       Two drawers with eighty four 3.5" drives with Equallogic trays supporting specified size SAS drives
     

PS6610 controller

  • Type 19 (blue)
    32 Gb cache per controller
  • Only two ports of the same type can be used at once!!! 
    You cannot use one SFP and one RJ45 port at the same time..
    2x 10Gb SFP ports
    2x 10 Gbase-T RJ45 ports
    1x management port RJ45
  • 1x serial port DB9
  • 2 IP addresses needed per chassis for ports eth0 thru eth1
    Only one controller is active at a time.  The other controller is purely a standby until failover occurs.
    Controllers will fail over from primary to secondary, corresponding IP addresses switch automatically.

 


PS6610 5U chassis rear view